Journal Publications:

1. N. Mortazavi, F. Hassiotou, D. Geddes, F. Hassanipour, “Mathematical Modeling of Mammary Ducts in Lactating Human Females,” Accepted for publication in ASME Journal of Biomechanical Engineering, 2014.

2. N. Mortazavi and F. Hassanipour, ”Effect of Apex Angle, Porosity, and Permeability on Flow and Heat Transfer in Triangular Porous Ducts“. Accepted for publication in ASME Journal of Heat Transfer, 2014.

3. X. An, H. Fultz, F. Hassanipour, “Experimental Study of Air Vortex Interaction with Porous Screens,” Accepted for publication in the Special Topics and Reviews in Porous Journal, 2014.

4. F. Hassanipour, V. Pozdin, A. Zakhidov, “Solar Water Heating System with Phase Change Materials and Carbon Nanotube,” ASHRAE  Transactions,  Volume (120) Issue (1), pp 1, 2014.

5. F. Hassanipour, I. Perez-Raya, N. Mortazavi, “Simulation of Vortex Ring Permeation in Porous Media,'' Journal of Porous Media, Volume (16) Issue (7), pp 597-605, 2013.

6. L. Small and F. Hassanipour “Bio-Inspired Segmented Flow: Effect of Particle Elongation on the Heat Transfer”, ASME Journal of Heat Transfer, Volume(135) Issue(7),  pp 071001-071007, 2013.

7. M. Shukla and F. Hassanipour, “Heat Transfer in Porous Media with Slurry of Phase Change Material,” International Journal of Engineering, Volume(6) Issue(1), 2012.

8.  F. Hassanipour and J. Lage, “Preliminary Experimental Study of a bio-Inspired Phase-Change Particle Capillary Heat Exchanger,” International Journal of Heat and Mass Transfer,  Volume(53), pp 3300-3307, 2010.

9. F. Hassanipour and J. Lage, “New Bio-Inspired, Multiphase Forced Convection Cooling by ABS Plastic or Encapsulated Paraffin Beads, ” ASME Journal of Heat Transfer, Volume(132) Issue(7),  pp 3777-3785, 2010.

10. F. Hassanipour and J. Lage, “Numerical Simulation of Capillary Convection with Encapsulated Phase Change Material,” Journal of Numerical Heat Transfer, PART A: Applications  Volume(55) Issue(10), pp 893-905, 2010.

11. F. Hassanipour and J. Lage, “Effect of a Porous Medium on the Flow of a Liquid Vortex,”  International Journal of Engineering, Volume(3) Issue(6), pp 588-596, 2009.

 

Conference Proceedings:

1. W. Holmes, V. Pozdin, F. Hassanipour, S. Darmanyan, A. Zakhidov, “Selective Solar Energy Absorbers: Synthesis, Processing and Continuous Lamination of Multifunctional CNT Sheets” , The Third International Symposium on Nanotechnology, Energy and Space, August 2013, Almaty, Kazakhstan.

2. K. Fathian , F. Hassanipour, and N. Gans Virtual Thermal Sensing and Control of Heat Distribution using State Estimation,'' ASME 2012 International Mechanical Engineering Congress and Exposition, November 2012, Houston, TX.

3. N. Omidvar and F. Hassanipour, Experimental Analysis of Nanofluid slurry through Rectangular Porous Channel,” ASME 2012 International Mechanical Engineering Congress and Exposition, November 2012, Houston, TX.

4. A.H. Fultz and F. Hassanipour, Analysis of  Vortex Flow Through Porous Media, 4th International Conference on Porous Media and its Applications in Science, Engineering and Industry, June 2012, Potsdam, Germany.

5. N. Mortazavi and F. Hassanipour, “Heat Transfer in Iso-Thermal Triangular Channel Filled with Porous Media,” The 10th International Conference on Nanochannels, Microchannels, and Minichannels, July 2012, Puerto Rico, USA.

6. N. Omidvar, R. Perkinson and F. Hassanipour, “'Experimental Analysis of Phase Change Material Slurry through Rectangular Porous Channel,” ITherm Conference, May 2012, San Diego, CA.

7. N. Mortazavi and F. Hassanipour, Effect of Inertia and Viscosity Force on Heat Transfer in Triangular Porous Channels,” ITherm Conference, May 2012, San Diego, CA.

8. N. Mortazavi and F. Hassanipour, “Effect of Apex Angle on the Flow and Heat Transfer in Triangular Porous Ducts with Iso-flux Boundary Conditions,” ASME 2011 International Mechanical Engineering Congress and Exposition, November 2011, Denver, CO.

9. M. Shukla and F. Hassanipour, “Heat Transfer Enhancement by Slurry of Phase Change Material Through Rectangular Porous Channel,” The Ninth International Conference on Nanochannels, Microchannels, and Minichannels, June 2011, Edmonton, Canada.

10. L. Small and F. Hassanipour, “Phase Change Material Particulate Flow through a Rectangular Channel: Effect of Parachute-Shaped Particles on the Heat Transfer,” The Ninth International Conference on Nanochannels, Microchannels, and Minichannels, June 2011, Edmonton, Canada.

11. F. Hassanipour and J. Lage, “Modeling and Analysis of Convection Heat Transfer with Phase Change Material: Effect of Particle Size,” Fourth International Conference on Thermal engineering Theory and Applications, January 2009, Abu Dhabi, U.A.E.

12. F. Hassanipour and J. Lage, “Simulation of Turbulent Flow in Porous Media,” Fourth International Conference on Thermal Engineering Theory and Applications, January 2009, Abu Dhabi, U.A.E.

13. F. Hassanipour and J. Lage, “Forced Convection Heat Transfer with Polystyrene and Encapsulated Paraffin Beads,” Fourth International Conference on Thermal Engineering Theory and Applications, January 2009, Abu Dhabi, U.A.E.

14. F. Hassanipour and J. Lage, “Turbulent Flow in Porous Media,” 61st Annual Meeting of the APS Division of Fluid Dynamics,  November 2008, San Antonio, Texas.

15. F. Hassanipour and J. Lage, “Enhanced Mini-channel Forced Convection with Encapsulated Phase-Change Particles,” Proc. 2008 ASME Summer Heat Transfer Conference HT2008, Jacksonville, FL.

16. F. Hassanipour and J. Lage “Bio-inspired Particle Enhanced Capillary Heat Exchanger,” Proceedings of the Sixth International ASME Conference on Nano-channels, Micro-channels, and Mini-channel, ICNMM 2008, Darmstadt, Germany.

 

 

Text Box: Advanced Research in Thermofluid Systems (ARTS) Lab

Home             Research                  Teaching                  Publication               People          Gallery